These Crystal Model Sets contain different coloured jacks(Red, Black & White) & connectors(long & short) in a prescribed number to be joined together in an illustrated way to form structures like Diamond, Graphite & Sodium Chloride.

Plain Dessicators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.
Daimeter 150mm,200mm, 250mm

Polylab Dessicators are made of Polypropylene and Polycarbonate. The autoclave vaccum desiccators can hold vaccum upto 740mm of Hg for 24hrs. without any greasing.
The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polyproptlene. An internal groove is provided on the flange to hold a silicon rubber O-Ring.
The Polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing.
Daimeter 150mm,200mm, 250mm

Blown in Low Density Polyethylene, this bottles dispense small uniform drops of liquids when pressed lightly.

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two trpered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point to contact. This Flask Stand can hold round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam autoclaved.

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths, Easy to load, these are essential in microbiology and immunology labs. The surface of the rack has raised alpha-numberic index for easy identification and has a central rod handle for convenient lifting.

Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered are provided to ensure firm grip on Rods having dia 1/2" or 3/8".

These long stem funnels have smooth walls, 60 cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.
daimeter 50mm, 62mm, 75mm, 100mm, 150mm.

This apparatus is made of p olyethylene has three main portions. The top portions is fitted witha thistle funnel and a bulb structure through which dilute acid can be poured will reacts with a metal sulphide in the base of the Apparatus. HS gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.
Capacity 250ml, 500ml, 1000ml.

These Micro Centrifuge Tubes, moulded in Polypropylene, have build in plugs which snap fit and make these tubes leakproof. These tubes can withstand high forces of an ultra centrifuge and can be used for transmitting samples for micro analysis.

These Petri Dishes moulded in Polypropylene are clear & unbreakable. The moulding material being Polypropylene, these can be repeatedly autoclaved. The ridges on the inner side of the cap prevent the base from sticking to the cap.
daimeter 50mm, 75mm, 100mm, 125mm, 150mm.

This is a fast release pipetting device for precise pipetting & zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can be easily disassembled for thorough cleaning.
2 ml, 10 ml, 25 ml capacity.

These Racks for Scintillation Vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There is an individual rack for both 8 ml. & 20 ml. vials. These rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preparations.
Rack for 90 vials of 8 ml. capacity
Rack for 50vials of 20ml. capacity

These narrow mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well an empty. On the other hand, the Polyethylene bottles too have excellent strenght and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.
Capacity 60 ml, 125ml, 250ml, 500ml, 1000ml.